DAL7020

Disco

Ablation Process

A processing method utilizing high-intensity laser irradiation in brief intervals to perform cutting.

• Little to no heat damage to the workpiece.
• Non-contact processing with low impact and load.
• Ideal for hard workpieces that are very difficult to process.
• Able to reduce streets down to 10 μm in width. (depends on workpiece conditions)

Ablation process example

Environmental Conditions:

Use clean, oil-free air (dew point between -10 - -20 , residual oil: 0.1 ppm, and filtration rating: 0.01μm/99.5 % or more).
Keep room temperature fluctuations within ±1℃ of the set value. (Set value should be between 20 - 25 ℃).
Keep cutting water and cleaning water 2 ℃ above room temperature (fluctuations within ±1 ℃).
The machines should be used in an environment, free from external vibration. Do not install machine near a ventilation opening, heat generation equipment or oil mist generating parts.
This machine uses water. In case of water leakage, please install the machine on the floor with sufficient waterproofing and drainage treatments.
All pressures specified above are gauge pressures.
As the above specification may change due to technical modifications. Please confirm when placing your order.
For further information, please contact your local sales representative.

Related Products

Back to Ablation Process

Disco

DFL7020

Ablation Process A processing method utilizing high-intensity laser irradiation in brief intervals to perform cutting. •…

Disco

DFL7161

High-quality, high-throughput standard laser grooving model Φ300 mm Ablation DFL7161 is a fully automatic laser saw for…

Disco

DFL7160

Supports various applications, including full cut and DAF cut Φ300 mm Ablation DFL7160 is a fully-automatic laser saw fo…